PAVER INSTALLATION
IN MURPHY.
Murphy's 2000s-era Rolling Ridge and Maxwell Creek subdivisions are prime for original-hardscape replacements and backyard build-outs.
Original-hardscape replacements, backyard patio expansions, and pool deck rebuilds across Rolling Ridge and Maxwell Creek.
Traditional two-story, Mediterranean, transitional.
- • Rolling Ridge
- • Maxwell Creek
- • Rolling Meadows
WHAT WE BUILD
IN MURPHY.
Paver Patios in Murphy
Outdoor living surfaces engineered for Texas heat and clay.
$16–$30 / sq ft installedView Patios details →03Paver Pool Decks in Murphy
Cool-touch, slip-resistant pool surrounds for DFW summers.
$20–$38 / sq ft installedView Pool Decks details →02Paver Driveways in Murphy
Load-rated driveway systems built to DOT sub-base standards.
$20–$38 / sq ft installedView Driveways details →05Paver Repair & Restoration in Murphy
Level, re-sand, seal, and replace — restore what already exists.
$6–$15 / sq ft depending on scopeView Repair details →Why Murphy paver work needs a real engineered base
Every paver installation in Murphy, TX starts under the surface. North Texas clay in Collin County expands and contracts with moisture — sometimes 3–4 inches per season — and pavers set on inadequate base ride that soil movement until they crack, sink, or heave.
We install every Murphy project with 8–12 inches of compacted structural aggregate, geotextile separation fabric, edge restraints, and polymeric sand joints. That's the same spec regardless of whether we're building a $6,000 walkway in Rolling Ridge or a $60,000 estate driveway in Rolling Meadows.
Paverston is a Belgard authorized installer serving Murphy and the wider Collin County area. Every project carries our workmanship warranty on top of the Belgard manufacturer warranty.
Murphy paver FAQs
Is my Murphy 2000s-era pool deck due for replacement?
If the coping is separating, the deck is heaving, or joints are washing out — yes. Most Murphy pool decks were installed on inadequate base and reach end of life around year 15-20.
How much does paver installation cost in DFW?
Preliminary DFW ranges: patios $16–$30/sq ft, driveways $20–$38/sq ft, pool decks $20–$38/sq ft, walkways $16–$30/sq ft, repair $6–$15/sq ft installed. Outdoor kitchens $10,000–$50,000+, fire pits $4,000–$20,000+, turf $11–$20/sq ft, lighting $2,500–$15,000+. Final pricing depends on material, demolition, base prep, drainage, and access. Upload photos for a project-specific range.
Why do pavers sink or become uneven in North Texas?
Almost always inadequate base preparation. North Texas clay expands and contracts violently with moisture; without 8–12 inches of compacted aggregate base and proper drainage, pavers settle within a few years.
Get a Murphy paver estimate today.
Upload photos for a preliminary range or call Mark to schedule an on-site walk-through.