PAVER INSTALLATION
IN MCKINNEY.
McKinney runs the full range — Historic Downtown brick sidewalks needing careful restoration, and Stonebridge / Craig Ranch estates wanting full outdoor living builds.
Historic-district compliant walkways, Stonebridge Ranch patios and pool decks, and Craig Ranch outdoor kitchens.
Victorian and Craftsman downtown; transitional and Tuscan in Stonebridge.
- • Stonebridge Ranch
- • Craig Ranch
- • Adriatica
- • Historic Downtown
- • Trinity Falls
WHAT WE BUILD
IN MCKINNEY.
Paver Patios in McKinney
Outdoor living surfaces engineered for Texas heat and clay.
$16–$30 / sq ft installedView Patios details →04Walkways & Entries in McKinney
Front paths, side yards, and courtyards that hold their line.
$16–$30 / sq ft installedView Walkways details →03Paver Pool Decks in McKinney
Cool-touch, slip-resistant pool surrounds for DFW summers.
$20–$38 / sq ft installedView Pool Decks details →07Outdoor Kitchens in McKinney
Built-in grills, counters, and bars integrated with your patio.
$10,000–$50,000+ per buildView Kitchens details →Why McKinney paver work needs a real engineered base
Every paver installation in McKinney, TX starts under the surface. North Texas clay in Collin County expands and contracts with moisture — sometimes 3–4 inches per season — and pavers set on inadequate base ride that soil movement until they crack, sink, or heave.
We install every McKinney project with 8–12 inches of compacted structural aggregate, geotextile separation fabric, edge restraints, and polymeric sand joints. That's the same spec regardless of whether we're building a $6,000 walkway in Stonebridge Ranch or a $60,000 estate driveway in Trinity Falls.
Paverston is a Belgard authorized installer serving McKinney and the wider Collin County area. Every project carries our workmanship warranty on top of the Belgard manufacturer warranty.
McKinney paver FAQs
Do you install pavers in McKinney's historic downtown district?
Yes, with the extra care that requires. McKinney's historic overlay has strict material and pattern guidelines. We source period-appropriate clay brick or tumbled concrete pavers and coordinate with the city historic preservation office before install.
How much does paver installation cost in DFW?
Preliminary DFW ranges: patios $16–$30/sq ft, driveways $20–$38/sq ft, pool decks $20–$38/sq ft, walkways $16–$30/sq ft, repair $6–$15/sq ft installed. Outdoor kitchens $10,000–$50,000+, fire pits $4,000–$20,000+, turf $11–$20/sq ft, lighting $2,500–$15,000+. Final pricing depends on material, demolition, base prep, drainage, and access. Upload photos for a project-specific range.
Why do pavers sink or become uneven in North Texas?
Almost always inadequate base preparation. North Texas clay expands and contracts violently with moisture; without 8–12 inches of compacted aggregate base and proper drainage, pavers settle within a few years.
Get a McKinney paver estimate today.
Upload photos for a preliminary range or call Mark to schedule an on-site walk-through.