PAVER INSTALLATION
IN ALLEN.
Allen's Twin Creeks and Watters Creek homes are on the age curve where original hardscape is settling — we replace and re-engineer without disturbing the surrounding landscape.
Backyard patio expansions, pool deck resurfacing, and driveway repairs across Twin Creeks and Montgomery Farm.
Traditional two-story, Texas Tuscan, modern farmhouse.
- • Twin Creeks
- • Waterford Parks
- • Watters Creek
- • Star Creek
- • Montgomery Farm
WHAT WE BUILD
IN ALLEN.
Paver Patios in Allen
Outdoor living surfaces engineered for Texas heat and clay.
$16–$30 / sq ft installedView Patios details →02Paver Driveways in Allen
Load-rated driveway systems built to DOT sub-base standards.
$20–$38 / sq ft installedView Driveways details →05Paver Repair & Restoration in Allen
Level, re-sand, seal, and replace — restore what already exists.
$6–$15 / sq ft depending on scopeView Repair details →03Paver Pool Decks in Allen
Cool-touch, slip-resistant pool surrounds for DFW summers.
$20–$38 / sq ft installedView Pool Decks details →Why Allen paver work needs a real engineered base
Every paver installation in Allen, TX starts under the surface. North Texas clay in Collin County expands and contracts with moisture — sometimes 3–4 inches per season — and pavers set on inadequate base ride that soil movement until they crack, sink, or heave.
We install every Allen project with 8–12 inches of compacted structural aggregate, geotextile separation fabric, edge restraints, and polymeric sand joints. That's the same spec regardless of whether we're building a $6,000 walkway in Twin Creeks or a $60,000 estate driveway in Montgomery Farm.
Paverston is a Belgard authorized installer serving Allen and the wider Collin County area. Every project carries our workmanship warranty on top of the Belgard manufacturer warranty.
Allen paver FAQs
How much does a paver patio cost in Allen?
Allen paver patios typically run $16–$30/sq ft installed with concrete pavers, or $22–$36/sq ft for travertine. Access, base condition, and drainage tie-in drive the final number — upload photos for a specific range.
How much does paver installation cost in DFW?
Preliminary DFW ranges: patios $16–$30/sq ft, driveways $20–$38/sq ft, pool decks $20–$38/sq ft, walkways $16–$30/sq ft, repair $6–$15/sq ft installed. Outdoor kitchens $10,000–$50,000+, fire pits $4,000–$20,000+, turf $11–$20/sq ft, lighting $2,500–$15,000+. Final pricing depends on material, demolition, base prep, drainage, and access. Upload photos for a project-specific range.
Why do pavers sink or become uneven in North Texas?
Almost always inadequate base preparation. North Texas clay expands and contracts violently with moisture; without 8–12 inches of compacted aggregate base and proper drainage, pavers settle within a few years.
Get a Allen paver estimate today.
Upload photos for a preliminary range or call Mark to schedule an on-site walk-through.