PAVER INSTALLATION
IN DALLAS.
From Preston Hollow estates to Lakewood bungalows, Dallas paver work has to handle mature-tree root systems, mid-century concrete demolition, and clay soil that expands violently with the seasons.
Paver patios, driveways, and pool decks for established Dallas neighborhoods with tree canopies and legacy landscaping.
Traditional brick, mid-century modern, Tudor revival, and new contemporary builds.
- • Preston Hollow
- • Lakewood
- • Bishop Arts
- • Lower Greenville
- • Oak Cliff
- • M Streets
WHAT WE BUILD
IN DALLAS.
Paver Patios in Dallas
Outdoor living surfaces engineered for Texas heat and clay.
$16–$30 / sq ft installedView Patios details →02Paver Driveways in Dallas
Load-rated driveway systems built to DOT sub-base standards.
$20–$38 / sq ft installedView Driveways details →03Paver Pool Decks in Dallas
Cool-touch, slip-resistant pool surrounds for DFW summers.
$20–$38 / sq ft installedView Pool Decks details →05Paver Repair & Restoration in Dallas
Level, re-sand, seal, and replace — restore what already exists.
$6–$15 / sq ft depending on scopeView Repair details →Why Dallas paver work needs a real engineered base
Every paver installation in Dallas, TX starts under the surface. North Texas clay in Dallas County expands and contracts with moisture — sometimes 3–4 inches per season — and pavers set on inadequate base ride that soil movement until they crack, sink, or heave.
We install every Dallas project with 8–12 inches of compacted structural aggregate, geotextile separation fabric, edge restraints, and polymeric sand joints. That's the same spec regardless of whether we're building a $6,000 walkway in Preston Hollow or a $60,000 estate driveway in M Streets.
Paverston is a Belgard authorized installer serving Dallas and the wider Dallas County area. Every project carries our workmanship warranty on top of the Belgard manufacturer warranty.
Dallas paver FAQs
Do you install pavers in older Dallas neighborhoods with mature trees?
Yes. Preston Hollow, Lakewood, M Streets, and similar Dallas neighborhoods require careful root-zone excavation and often permeable paver systems so mature oaks and pecans keep getting water. We hand-dig within critical root zones and set base depths that don't compromise the tree.
How much does paver installation cost in DFW?
Preliminary DFW ranges: patios $16–$30/sq ft, driveways $20–$38/sq ft, pool decks $20–$38/sq ft, walkways $16–$30/sq ft, repair $6–$15/sq ft installed. Outdoor kitchens $10,000–$50,000+, fire pits $4,000–$20,000+, turf $11–$20/sq ft, lighting $2,500–$15,000+. Final pricing depends on material, demolition, base prep, drainage, and access. Upload photos for a project-specific range.
Why do pavers sink or become uneven in North Texas?
Almost always inadequate base preparation. North Texas clay expands and contracts violently with moisture; without 8–12 inches of compacted aggregate base and proper drainage, pavers settle within a few years.
Get a Dallas paver estimate today.
Upload photos for a preliminary range or call Mark to schedule an on-site walk-through.