PAVER INSTALLATION
IN FRISCO.
Frisco is new-build country — Starwood, Newman Village, Phillips Creek Ranch — where the developer-grade concrete pool deck fails inside five years and homeowners upgrade to paver systems.
Pool deck rebuilds, outdoor kitchens, and full-backyard transformations in Frisco's newer master-planned communities.
Modern Mediterranean, transitional, contemporary Prairie.
- • Starwood
- • Stonebriar
- • Newman Village
- • Phillips Creek Ranch
- • The Grove
WHAT WE BUILD
IN FRISCO.
Paver Pool Decks in Frisco
Cool-touch, slip-resistant pool surrounds for DFW summers.
$20–$38 / sq ft installedView Pool Decks details →07Outdoor Kitchens in Frisco
Built-in grills, counters, and bars integrated with your patio.
$10,000–$50,000+ per buildView Kitchens details →01Paver Patios in Frisco
Outdoor living surfaces engineered for Texas heat and clay.
$16–$30 / sq ft installedView Patios details →08Fire Pits & Features in Frisco
Gas fire pits, fireplaces, and fire tables as the patio centerpiece.
$4,000–$20,000+ per featureView Fire details →Why Frisco paver work needs a real engineered base
Every paver installation in Frisco, TX starts under the surface. North Texas clay in Collin & Denton Counties expands and contracts with moisture — sometimes 3–4 inches per season — and pavers set on inadequate base ride that soil movement until they crack, sink, or heave.
We install every Frisco project with 8–12 inches of compacted structural aggregate, geotextile separation fabric, edge restraints, and polymeric sand joints. That's the same spec regardless of whether we're building a $6,000 walkway in Starwood or a $60,000 estate driveway in The Grove.
Paverston is a Belgard authorized installer serving Frisco and the wider Collin & Denton Counties area. Every project carries our workmanship warranty on top of the Belgard manufacturer warranty.
Frisco paver FAQs
Can you replace a builder-grade concrete pool deck in Frisco?
Constantly. Newman Village, Starwood, and Phillips Creek Ranch pool decks are the number-one job we do in Frisco. We saw-cut the coping, remove the concrete, engineer the base for pool-shell drainage, and install cool-touch travertine or porcelain pavers over the correct footprint.
How much does paver installation cost in DFW?
Preliminary DFW ranges: patios $16–$30/sq ft, driveways $20–$38/sq ft, pool decks $20–$38/sq ft, walkways $16–$30/sq ft, repair $6–$15/sq ft installed. Outdoor kitchens $10,000–$50,000+, fire pits $4,000–$20,000+, turf $11–$20/sq ft, lighting $2,500–$15,000+. Final pricing depends on material, demolition, base prep, drainage, and access. Upload photos for a project-specific range.
Why do pavers sink or become uneven in North Texas?
Almost always inadequate base preparation. North Texas clay expands and contracts violently with moisture; without 8–12 inches of compacted aggregate base and proper drainage, pavers settle within a few years.
Get a Frisco paver estimate today.
Upload photos for a preliminary range or call Mark to schedule an on-site walk-through.