PAVER INSTALLATION
IN LEWISVILLE.
Lewisville's Castle Hills and Vista Ridge master-planned neighborhoods produce steady patio and pool deck upgrade demand as homes hit the 15-year mark.
Second-owner backyard upgrades, pool deck rebuilds, and driveway restorations across Castle Hills and Vista Ridge.
Mediterranean, transitional traditional, modern.
- • Castle Hills
- • Vista Ridge
- • Old Town
- • Highland Village border
WHAT WE BUILD
IN LEWISVILLE.
Paver Patios in Lewisville
Outdoor living surfaces engineered for Texas heat and clay.
$16–$30 / sq ft installedView Patios details →03Paver Pool Decks in Lewisville
Cool-touch, slip-resistant pool surrounds for DFW summers.
$20–$38 / sq ft installedView Pool Decks details →02Paver Driveways in Lewisville
Load-rated driveway systems built to DOT sub-base standards.
$20–$38 / sq ft installedView Driveways details →05Paver Repair & Restoration in Lewisville
Level, re-sand, seal, and replace — restore what already exists.
$6–$15 / sq ft depending on scopeView Repair details →Why Lewisville paver work needs a real engineered base
Every paver installation in Lewisville, TX starts under the surface. North Texas clay in Denton County expands and contracts with moisture — sometimes 3–4 inches per season — and pavers set on inadequate base ride that soil movement until they crack, sink, or heave.
We install every Lewisville project with 8–12 inches of compacted structural aggregate, geotextile separation fabric, edge restraints, and polymeric sand joints. That's the same spec regardless of whether we're building a $6,000 walkway in Castle Hills or a $60,000 estate driveway in Highland Village border.
Paverston is a Belgard authorized installer serving Lewisville and the wider Denton County area. Every project carries our workmanship warranty on top of the Belgard manufacturer warranty.
Lewisville paver FAQs
Is Lewisville worth investing in paver upgrades if I might sell?
Yes — a properly installed paver patio or pool deck typically returns 70-80% at resale in Lewisville and it makes the listing photograph dramatically better than aging concrete. It's one of the highest-return outdoor upgrades.
How much does paver installation cost in DFW?
Preliminary DFW ranges: patios $16–$30/sq ft, driveways $20–$38/sq ft, pool decks $20–$38/sq ft, walkways $16–$30/sq ft, repair $6–$15/sq ft installed. Outdoor kitchens $10,000–$50,000+, fire pits $4,000–$20,000+, turf $11–$20/sq ft, lighting $2,500–$15,000+. Final pricing depends on material, demolition, base prep, drainage, and access. Upload photos for a project-specific range.
Why do pavers sink or become uneven in North Texas?
Almost always inadequate base preparation. North Texas clay expands and contracts violently with moisture; without 8–12 inches of compacted aggregate base and proper drainage, pavers settle within a few years.
Get a Lewisville paver estimate today.
Upload photos for a preliminary range or call Mark to schedule an on-site walk-through.