PAVER INSTALLATION
IN LAS COLINAS.
Las Colinas mixes golf-course estates in Cottonwood Valley with canal-adjacent townhomes — the work here spans full estate hardscape to precise waterfront courtyards.
Golf-course estate patios, waterfront walkways, and pool deck rebuilds across Cottonwood Valley and The Canals.
Mediterranean estate, contemporary, transitional urban.
- • Cottonwood Valley
- • University Hills
- • Hackberry Creek
- • The Canals
WHAT WE BUILD
IN LAS COLINAS.
Paver Patios in Las Colinas
Outdoor living surfaces engineered for Texas heat and clay.
$16–$30 / sq ft installedView Patios details →03Paver Pool Decks in Las Colinas
Cool-touch, slip-resistant pool surrounds for DFW summers.
$20–$38 / sq ft installedView Pool Decks details →07Outdoor Kitchens in Las Colinas
Built-in grills, counters, and bars integrated with your patio.
$10,000–$50,000+ per buildView Kitchens details →04Walkways & Entries in Las Colinas
Front paths, side yards, and courtyards that hold their line.
$16–$30 / sq ft installedView Walkways details →Why Las Colinas paver work needs a real engineered base
Every paver installation in Las Colinas, TX starts under the surface. North Texas clay in Dallas County expands and contracts with moisture — sometimes 3–4 inches per season — and pavers set on inadequate base ride that soil movement until they crack, sink, or heave.
We install every Las Colinas project with 8–12 inches of compacted structural aggregate, geotextile separation fabric, edge restraints, and polymeric sand joints. That's the same spec regardless of whether we're building a $6,000 walkway in Cottonwood Valley or a $60,000 estate driveway in The Canals.
Paverston is a Belgard authorized installer serving Las Colinas and the wider Dallas County area. Every project carries our workmanship warranty on top of the Belgard manufacturer warranty.
Las Colinas paver FAQs
Do you install pavers on Las Colinas waterfront properties?
Yes — canal-adjacent and Lake Carolyn properties need extra attention to drainage away from the seawall and materials rated for occasional water exposure. We design the slope and material spec around those constraints.
How much does paver installation cost in DFW?
Preliminary DFW ranges: patios $16–$30/sq ft, driveways $20–$38/sq ft, pool decks $20–$38/sq ft, walkways $16–$30/sq ft, repair $6–$15/sq ft installed. Outdoor kitchens $10,000–$50,000+, fire pits $4,000–$20,000+, turf $11–$20/sq ft, lighting $2,500–$15,000+. Final pricing depends on material, demolition, base prep, drainage, and access. Upload photos for a project-specific range.
Why do pavers sink or become uneven in North Texas?
Almost always inadequate base preparation. North Texas clay expands and contracts violently with moisture; without 8–12 inches of compacted aggregate base and proper drainage, pavers settle within a few years.
Get a Las Colinas paver estimate today.
Upload photos for a preliminary range or call Mark to schedule an on-site walk-through.