PAVER INSTALLATION
IN IRVING.
Irving spans Valley Ranch established homes and the newer Las Colinas urban core — the paver work ranges from full backyard rebuilds to compact urban patios.
Backyard rebuilds, driveway restorations, and pool deck installs across Valley Ranch and Song.
Ranch, Mediterranean, contemporary urban.
- • Las Colinas
- • Valley Ranch
- • Song
- • MacArthur Ridge
WHAT WE BUILD
IN IRVING.
Paver Patios in Irving
Outdoor living surfaces engineered for Texas heat and clay.
$16–$30 / sq ft installedView Patios details →02Paver Driveways in Irving
Load-rated driveway systems built to DOT sub-base standards.
$20–$38 / sq ft installedView Driveways details →03Paver Pool Decks in Irving
Cool-touch, slip-resistant pool surrounds for DFW summers.
$20–$38 / sq ft installedView Pool Decks details →05Paver Repair & Restoration in Irving
Level, re-sand, seal, and replace — restore what already exists.
$6–$15 / sq ft depending on scopeView Repair details →Why Irving paver work needs a real engineered base
Every paver installation in Irving, TX starts under the surface. North Texas clay in Dallas County expands and contracts with moisture — sometimes 3–4 inches per season — and pavers set on inadequate base ride that soil movement until they crack, sink, or heave.
We install every Irving project with 8–12 inches of compacted structural aggregate, geotextile separation fabric, edge restraints, and polymeric sand joints. That's the same spec regardless of whether we're building a $6,000 walkway in Las Colinas or a $60,000 estate driveway in MacArthur Ridge.
Paverston is a Belgard authorized installer serving Irving and the wider Dallas County area. Every project carries our workmanship warranty on top of the Belgard manufacturer warranty.
Irving paver FAQs
How long does a driveway paver install take in Irving?
A typical Irving residential driveway (600-900 sq ft) takes 5-8 working days — excavation and base prep is 2-3 days, install is 2-3 days, and edge restraint plus polymeric sand finishes it. Weather and access can shift the timeline.
How much does paver installation cost in DFW?
Preliminary DFW ranges: patios $16–$30/sq ft, driveways $20–$38/sq ft, pool decks $20–$38/sq ft, walkways $16–$30/sq ft, repair $6–$15/sq ft installed. Outdoor kitchens $10,000–$50,000+, fire pits $4,000–$20,000+, turf $11–$20/sq ft, lighting $2,500–$15,000+. Final pricing depends on material, demolition, base prep, drainage, and access. Upload photos for a project-specific range.
Why do pavers sink or become uneven in North Texas?
Almost always inadequate base preparation. North Texas clay expands and contracts violently with moisture; without 8–12 inches of compacted aggregate base and proper drainage, pavers settle within a few years.
Get a Irving paver estimate today.
Upload photos for a preliminary range or call Mark to schedule an on-site walk-through.