PAVER INSTALLATION
IN FARMERS BRANCH.
Farmers Branch's older Brookhaven ranch homes and newer Mercer Crossing builds keep demand balanced between patio replacements and new outdoor living installs.
Patio replacements, driveway aprons, and pool deck rebuilds across Brookhaven and Mercer Crossing.
Mid-century ranch, transitional, contemporary new-build.
- • Brookhaven
- • Meadowcreek
- • Mercer Crossing
WHAT WE BUILD
IN FARMERS BRANCH.
Paver Patios in Farmers Branch
Outdoor living surfaces engineered for Texas heat and clay.
$16–$30 / sq ft installedView Patios details →02Paver Driveways in Farmers Branch
Load-rated driveway systems built to DOT sub-base standards.
$20–$38 / sq ft installedView Driveways details →03Paver Pool Decks in Farmers Branch
Cool-touch, slip-resistant pool surrounds for DFW summers.
$20–$38 / sq ft installedView Pool Decks details →05Paver Repair & Restoration in Farmers Branch
Level, re-sand, seal, and replace — restore what already exists.
$6–$15 / sq ft depending on scopeView Repair details →Why Farmers Branch paver work needs a real engineered base
Every paver installation in Farmers Branch, TX starts under the surface. North Texas clay in Dallas County expands and contracts with moisture — sometimes 3–4 inches per season — and pavers set on inadequate base ride that soil movement until they crack, sink, or heave.
We install every Farmers Branch project with 8–12 inches of compacted structural aggregate, geotextile separation fabric, edge restraints, and polymeric sand joints. That's the same spec regardless of whether we're building a $6,000 walkway in Brookhaven or a $60,000 estate driveway in Mercer Crossing.
Paverston is a Belgard authorized installer serving Farmers Branch and the wider Dallas County area. Every project carries our workmanship warranty on top of the Belgard manufacturer warranty.
Farmers Branch paver FAQs
Do you pull permits in Farmers Branch?
Yes — Farmers Branch requires permits for driveway replacements and any hardscape that alters drainage. We pull the permit, coordinate the inspection, and hand you the closed permit at project completion.
How much does paver installation cost in DFW?
Preliminary DFW ranges: patios $16–$30/sq ft, driveways $20–$38/sq ft, pool decks $20–$38/sq ft, walkways $16–$30/sq ft, repair $6–$15/sq ft installed. Outdoor kitchens $10,000–$50,000+, fire pits $4,000–$20,000+, turf $11–$20/sq ft, lighting $2,500–$15,000+. Final pricing depends on material, demolition, base prep, drainage, and access. Upload photos for a project-specific range.
Why do pavers sink or become uneven in North Texas?
Almost always inadequate base preparation. North Texas clay expands and contracts violently with moisture; without 8–12 inches of compacted aggregate base and proper drainage, pavers settle within a few years.
Get a Farmers Branch paver estimate today.
Upload photos for a preliminary range or call Mark to schedule an on-site walk-through.